Portable Water Level Meter

L100 Portable Water Level Meter is our latest patent product. It is lower than the current multi-level gauge on the market compared to more convenient and practical, light weight, high precision, low price, not afraid of water, the use of a long time, beautiful and durable, suitable for hydrology, geology, water conservancy, agriculture, forestry, engineering and other areas of personnel, it is a good choice of replacement of old products .

The water level gauge and all accessories as shown on the right chart. All the components of the water level gauge are housed in a stainless steel probe. When the probe touched the surface of the contact, the circuit started to issue more than 80 dB alarm sounds, then put the probe as long as the tape measure to see hanging on the scale, we can know the depth of the water level. The round is the tape, and the charger is under the tape.

The water level gauge has the following features:

1, light weight, small size and portable. The old portable water level gauge is used with a dedicated folder wire metric scale, plus a small winch, water level information is provided by wire transferred to the ground and then send sound and light tips. While a person can carry, but the size of the weight still quite large, is not convenient to use. All circuits, batteries, speakers and other devices of our water level gauge are installed in the stainless steel shell of the probe, its volume diameter is 38400 mm, weight 0.5 kg, it is very small in size and easy.

2、High precision, good reliability, low prices. Currently used portable water level gauge must be rolled up with the winch release when measure. There are copper wires inside the folder, the probe has a considerable deflection when it sag. This resulted in a greater measurement error, and metric scale is easy to fracture, it need for additional overhead While this hydrograph using only ordinary metric scale, nearly no error when drooping, it has high precision. This metric scale is very cheap. Contact using a special high-level stainless steel, dual-contact AC sampling circuit, a DC electric polarization will not touch the water arising from adverse reaction to the phenomenon of water-sensing touch sensitive and reliable.

3、Waterproof performance is good, durable, stylish. All the circuits and devices are housed in the probe, and are sealed in the probe. Speakers are use of piezoelectric ceramic-type that is not afraid of the water. Switchusing waterproof magnetic reed pipe, even if soaked in water it can continue to work if you dry it. The circuit is still in hibernation when water level gauge switch opens. Only when in contact with water, the circuit is start-up. Therefore, charging more than once is available in January. Also It specifically increase the size of the probe shell, When the probe into the water, the probe will be the same as the boat floats on the water that avoid damage to probe sinking into the water. Probe housing is used of advanced stainless steel. The product is abrasion-resistant.